AIS Pilot Plug WiFi Antenna Polarity Auto Corrector without GPS

Introduction:
The new version of AIS PILOT PLUG WiFi since we developed the frist one on year 2011.in new one that we reprogram the chips to make it more stable and let users to setup more easy.
New unit still provides an easy way to receive data from the vessel Automatic Identification System (AIS Class A,Class B) device and straight to their own ECDIS PC or PPC,iPhone,iPad which built in a WiFi network adapter .The AIS Pilot Plug sends out all relevant information such as AIS targets, ship's Position, Heading, SOG,COG and ROT(rate-of-turn) over TCP/IP protocol. Suitable for use with SEAiq Pilot (recommended) ,iNavX or iSailor on iPad;AisPilot on Android.

Features:
IMO Standard AIS Pilot Plug interfaces(AMP) for mariners;
Compatible with IEEE 802.11b/g/n;
Cleared indicator LEDs unit status;
LED for charging status;
Built-in battery can working Approx 20hrs ;
Built-in WiFi antenna, strong signal and long range data transmit but depends on the local conditions;
Built-in an automatic sensor to correct polarity reversed issue (TX+- or RX+-) in ship's AIS pilot plug socket
Baud rate:38400bps;
Unit working as AP mode,PC or iPad on DHCP,Host IP address:"192.168.1.1",Port:"8888"
Allow clients access at same time: 32 clients Max;
Weight 120g with battery;
Cable length: 1 meter;
Dimensions: L*W*H :86mm* 46mm* 26mm;
Working temperature: -25? ~85?
WiFi Antenna: 4db
CE,FCC, Certificate;
WiFi to serial (com port) program included.
Package Content:
AIS Pilot Plug WiFi Unit: 1pcs
Power Adapter Supply: Input: AC110v~240V 50/60Hz, Output: DC5V 1A: 1pcs
Micro USB for charger: 1pcs
AIS pilot plug cable: 1pcs
QUICK Guide: 1pcs
Driver DISK:1pcs