Handheld ultrasonic flowmeter
handheld ultrasonic flow meter is battery-powered ultrasonic flow meter with the capability of full-size flow meter. It is carefully designed for portability and ease of use.

Features:
Better than 1% accuracy.
0.2% of repeatability.
Positive / negative / net flow totaliser
4 line LCD display
Operate with clamp-on transducers.
RS-232/OCT output
Ni-MH Battery life for up to 12 hours continuous operation

Transducer Parameters
Parameters:
Pipe size (mm): DN50-700
Pipe size (inch): 2-28”
Material: ABS
Frequency: 1 MHZ
Installation method: V, Z
Calibration: Calibrate with the main unit
Magnetism: Magnetic
Temperature: 32DegF-158DegF (0DegC -70DegC)
Protection class: IP65
Dimension (mm): 60×45×45
Weight (g): 250
Liquid types: Water, sea water, waste water, chemical liquids, crude oil, alcohol, beer, etc.
Suspension concentration: ≦2000ppm, may contain very small amount of air bubbles.
Pipe material: All metals, most plastics, fiber glass, etc,
Dedicated shielded transducer cable: Standard length 5 meter×2, can be to 10 meter×2 or 15 meter×2

Parameters:
Pipe size (mm): DN300-6000
Pipe size (inch): 12-240”
Material: ABS
Frequency: 1 MHZ
Installation method: Z
Calibration: Calibrate with the main unit
Magnetism: No Magnetic
Temperature: 32DegF-158DegF (0DegC -70DegC)
Protection class: IP65
Dimension (mm): 87×70×55
Weight (g): 650
Liquid types: Water, sea water, waste water, chemical liquids, crude oil, alcohol, beer, etc.
Suspension concentration: ≦ 2000ppm, may contain very small amount of air bubbles.
Pipe material: All metals, most plastics, fiber glass, etc,
Dedicated shielded transducer cable: Standard length 5 meter×2, can be to 10 meter×2 or 15 meter×2

Liquid types: Water, sea water, waste water, chemical liquids, crude oil, alcohol, beer, etc.
Suspension concentration: ≦ 2000ppm, may contain very small amount of air bubbles.
Pipe material: All metals, most plastics, fiber glass, etc,

Specification:
Linearity: 0.5%
Repeatability: 0.2%
Accuracy: ±1% of reading at rates>0.6 ft/s. ±0.5% with on-site calibration
Response Time: 0-999 seconds, user-configurable
Velocity: ±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional
Pipe Size: (15 ~ 6,000mm)
Rate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable
Totaliser: 7-digit totals for net, positive and negative flow
Liquid Types: Virtually all liquids
Security: Setup lockout. Access code needed for unlocking
Display: 4x16 English letters
Communication Interface: RS-232C, baud-rate: from 75 to 115,200 bps. Protocol made by the manufacturer. User protocols can be made on enquiry.

Transducers:
Power Supply: 3 AAA Ni-H built-in batteries, when fully charged it will last over 10 hours of operation. 90-230VAC for the charger
Data Logger: Built-in data logger can store over 2,000 lines of data
Manual Totalizer: 7-digit press-key-to-go totalizer for calibration
Housing Material: ABS. Aluminum alloy protective case
Case Size: 3.9"x2.6"x0.8" (100x66x20mm)
Handset Weight: 1.2 lbs (514g) with batteries