$45.50
On Hold
Watch Watches Battery Pulse Tester Meter Analyzer Coil Circuit for Watch repair
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Battery test Instruction:
Move the battery type selector to the appropriate position then insert the battery .
Positive Side Down:
Press down on the spring clip to make contact with the battery check the meter indicator. If the indicator is on yellow or red then the battery should be replaced.
Movement Pulse Test Instructions:
Slide the battery type selector or switch to pulse test. Place the watch face down on the tester where indicated.
Place watch here:
At this time the tester should beep at 1,5,10,20,30, or 60 second intervals depending on the movement.
Battery Replacement:
When the switch is on pulse test and the red light does not turn on the tester battery (9- Volt Alkaline) has to be replaced.
Package included:
1* watch tester
1* detecting probe
Move the battery type selector to the appropriate position then insert the battery .
Positive Side Down:
Press down on the spring clip to make contact with the battery check the meter indicator. If the indicator is on yellow or red then the battery should be replaced.
Movement Pulse Test Instructions:
Slide the battery type selector or switch to pulse test. Place the watch face down on the tester where indicated.
Place watch here:
At this time the tester should beep at 1,5,10,20,30, or 60 second intervals depending on the movement.
Battery Replacement:
When the switch is on pulse test and the red light does not turn on the tester battery (9- Volt Alkaline) has to be replaced.
Package included:
1* watch tester
1* detecting probe
HK, NT