Feature:

- Programmable controller and no need to connect the computer;
- Easy to use, directly use programming button on the board to write the program, and don’t need computer and software;
- 16 control point(input and output);
- 3 group of timer(0.01seconds～0.99seconds; 1second～99seconds; 1 minute～99munite);
- 1 x 15bit Counter (setting 1～1307674368000 times);
- 1 x programming display LED (maximum display value: 9999);
- 1 x temperature detection port (1～99 degrees);
- 1 x analog quantity detection port (0～5V);
- 1 x PWM pulse width modulation port (2KHZ adjustable duty ratio 1%～ 99%);
- 1 x forced reset port;
- 1 x Interrupt control port;
- 1 x serial port;
- 3 kinds of Standby power supply mode(normal 15 mA, spare time 10 mA,power down 4 mA);
- 2 x High speed pulse output port (for stepper motor driver);
- Can be set to 16 segment, for each segment pulse set number 1～9999;
- Pulse frequency adjustable range: 100HZ～9900HZ (with rise-and-fall program);
- 16 segment pulse step can set work frequency alone;
- Size: 71×56 mm

Package included:
1 x PLC Controller board
1 x English Manual (We will send it to you by email after you purchase)