$39.50
On Hold
NEW Standard 2*28 pin Jamma Harness for Arcade Loom Multicade Game Cabinet
Description
this is Brand new Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs.
This harness is ideal for replacing old harness in any old JAMMA cabinet or for customers who are bulding new machines with JAMMA boards.
Product Features
♦All wiring uses 22AWG (22AWG is enough for Jamma PCB ) ,Cheaper harnesses will only use 24AWG or 26AWG or even (Marked with 22AWG but actually with 24 or 26 AWG quality ) The problem is if the resistance of wire is too high, it can cause a significant power loss before the DC voltages even reach the JAMMA PCB!
♦Fast connection to power supply with attached terminal forks for all voltages
(+5VDC, +12VDC, -5VDC, GND).
♦Video signals connect through included standard monitor connector.
♦Full Grounding Loop for all those joystick/button micro-switches on your
control panel.
♦Easy to follow installation with below pinout sheet !
Wiring diagram
Below is the basic pinout diagram for jamma pcb , you can use this as reference when you are connecting the wire/ harness.
JAMMA Pinout Chart
Notice :
For Power Sections: (Pins A-F, 1-6, e, f, 27, 28)
When you are connecting power cables +5V +12V and -5V , please must double check before you connect them , if you connect them wrong , it's possible that you will get your jamma pcb damaged.
this is Brand new Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs.
This harness is ideal for replacing old harness in any old JAMMA cabinet or for customers who are bulding new machines with JAMMA boards.
Product Features
♦All wiring uses 22AWG (22AWG is enough for Jamma PCB ) ,Cheaper harnesses will only use 24AWG or 26AWG or even (Marked with 22AWG but actually with 24 or 26 AWG quality ) The problem is if the resistance of wire is too high, it can cause a significant power loss before the DC voltages even reach the JAMMA PCB!
♦Fast connection to power supply with attached terminal forks for all voltages
(+5VDC, +12VDC, -5VDC, GND).
♦Video signals connect through included standard monitor connector.
♦Full Grounding Loop for all those joystick/button micro-switches on your
control panel.
♦Easy to follow installation with below pinout sheet !
Wiring diagram
Below is the basic pinout diagram for jamma pcb , you can use this as reference when you are connecting the wire/ harness.
JAMMA Pinout Chart
Notice :
For Power Sections: (Pins A-F, 1-6, e, f, 27, 28)
When you are connecting power cables +5V +12V and -5V , please must double check before you connect them , if you connect them wrong , it's possible that you will get your jamma pcb damaged.
HK, NT