This Oppose Mod Kit included :
Futures Inlet (R) - Rhodium Plated.
(Alpha) Eutectic (Low Temperature) cast copper alloy Conductor.
Mindoro 99% Silver 1% Gold Wire 1.0mm - Double Run.
Twist cable consisting of a pair 1.0mm of Mindoro silver gold wire, sleeved with white PTFE.
Cables are soldered using Mindoro 9.5% silver solder supreme - (Mindoro’s top of the range solder).
9.5% Silver is used for better conductivity and retaining superior sound qualities with 0.1% gold added.

Easy install, just 3 minutes to enhance both visual and sound quality of your Oppose Blue-Ray Player.

Installation as follows :
1 unscrew 9 bolts (4 located at side, 5 at the back) remove the cover case
2 unplug the Black color connector & unscrew the earth wire(green/yellow)
3 unscrew the IEC 2 bolts & remove the original IEC & Cables
4 take this mod kit pass in the IEC hole
5 tighten 2 IEC bolts
6 tighten the earth wire(middle short one) by the bolt
7 plug the white connector to the onboard pin
8 tighten all the bolts of the cover case