Features:
Plug and play. HUD can auto adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System)
Comprehensive display. HUD can display many parameters at the same time as follows, vehicle sp engine speed, water temperature (voltage, throttle valve position, ignition advance angle, time c km acceleration), fuel consumption, mileage, low fuel tips, engine failure.
Divers iform display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
Free switch. Km and mile can be switched freely to meet the need of inch auto meter.
Suitable size. The display area is 5.5 inches which is very clear for driver to read data.
Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping protect the vehicle's battery. Moreover, we pre- serve the hand switch function to control the HUD
Flexible alarm mode. HUD can offer single-stage and four-stage over speed alarm modes to choose make driving safer.
Engine speed alarm. It contributes to shift gear in time to save fuel also has significance
Flexible brightness adjustment. The brightness can be adjusted automatically or manually to react best state which is in harmony with the environment.
Technical specifications:
Service conditions:
Environment temperature: -400C—+800C Barometric press: 86-106 KPa Rel humidity: 10%-95%Environment voice: =30dB(A)
Work voltage: 9V-16Vdc(12Vdc/400mA)
Size of product: 14x85x147 (mm)
All of the electronic components are conform to ROSH standards.
Weight of product: 350g
Conforming to the China Compulsory Certification.
Engine speed alarm. It contributes to shift gear in time to save fuel
Flexible brightness adjustment. The brightness can be adjusted automatically or manually to react best state which is in harmony with the environment.

Remarks:
• Open and look for the sticker under the engine hood, can use this product if it has the sticker witl OBDII CERTIFIED.
1. Check if it has the automobile diagnostic socket under the steering wheel(most of car in China ha socket manufactured after the year 2006. 2. Identify the car's 16-pin diagnostic socket, connecting the OBDII cable to the 16-pin diagnostic se it has this socket. 3. Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust angle an position. 4. The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensure that the information, such as car speed can be projected to the reflective film.
Preparation before installation and using: 1. Fine your car brands, you need to meet the OBD II standard models, 2. Identify the vehicle diagnostic socket , due to the different models are different outlet locations, a some rather narrow place, you can buy patch cords. Manufacturers and agents can contact the sr point of purchase. 3. Connect with your cell phone by bluetooth, you can test your car and no need any other OBDII Diagnostic Tools

Package Includes:
• 1PCS