$31.00
On Hold
NTC thermistor Analog Temperature Temp Sensor Module for Arduino & Raspberry Pi
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
An NTC thermistor sensor is included, supporting high sensitivity.
A comparator LM393 is contained, so it can output both digital and analog signals at the same time.
Include a potentiometer to adjust the threshold of detection.
Working voltage: 3.3V-5V; PCB size: 2.3 x 2.3 cm
High measurement accuracy with a wide range, good stability, and strong overload capacity.
Product details of Analog Temperature Sensor Module for Arduino & Raspberry Pi
An analog temperature sensor module that consists of an NTC thermistor, resistor, capacitor in a circuit.
The NTC thermistor is very sensitive to ambient temperature and hence widely used to detect the temperature, with a wide range of temperature measurement
The threshold of temperature detection can be adjusted by rotating the potentiometer. When the temperature exceeds the threshold, D0 outputs low and the corresponding LED will light up.
A 4-pin anti-reverse cable included.
Application
The module can be applied to temperature detection, temperature control sensor, and ambient temperature detection, as well as temperature alarm.
What's in the box:
1 x Analog Temperature Sensor Module for Arduino & Raspberry Pi
1 x 4-Pin Anti-Reverse cable
A comparator LM393 is contained, so it can output both digital and analog signals at the same time.
Include a potentiometer to adjust the threshold of detection.
Working voltage: 3.3V-5V; PCB size: 2.3 x 2.3 cm
High measurement accuracy with a wide range, good stability, and strong overload capacity.
Product details of Analog Temperature Sensor Module for Arduino & Raspberry Pi
An analog temperature sensor module that consists of an NTC thermistor, resistor, capacitor in a circuit.
The NTC thermistor is very sensitive to ambient temperature and hence widely used to detect the temperature, with a wide range of temperature measurement
The threshold of temperature detection can be adjusted by rotating the potentiometer. When the temperature exceeds the threshold, D0 outputs low and the corresponding LED will light up.
A 4-pin anti-reverse cable included.
Application
The module can be applied to temperature detection, temperature control sensor, and ambient temperature detection, as well as temperature alarm.
What's in the box:
1 x Analog Temperature Sensor Module for Arduino & Raspberry Pi
1 x 4-Pin Anti-Reverse cable
HK, NT