Description
The TE405P is a Quad span, selectable four T1 (24-channel) or E1 (32-channel) card that supports all the functionality of the Digium quad T1/E1 card. The card can be used to deliver a wide range of PBX and IVR services to the network or handset including Three-Way Calling, Call Conferencing,Voicemail ,and VoIP Gateways.
It supports Asterisk / Trixbox / Elastix / Freepbx ; supports Zaptel and Dahdi .
It supports PCI 5V interface.
The TE405P 4 port E1/T1/J1 card suit for any country using E1 T1 or J1 circuits. You can connect it to any digital PBX with these ports available, your local telco or T1/E1 channels banks.
E1 circuits are used in Asia, Europe, South America and Middle East
T1 circuits are used in USA, Canada
J1 circuits are used in Japan
Key benefits
--Creating ISDN PABX for PRI/PRA
--Application for VOIP gateways
--ISDN LAN routers for PRI
--ISDN least cost routers for PRI
--Analog to digital signalization converters
--ISDN test equipment for PRI
--Call center
Key features
--Quad span E1/T1/J1 card
--PCI 5V interface
-- ISDN PRI protocol
--Support SS7
--High Performance PCI BusMaster with up to 2Kbytes FIFO.
--Easy to install: Use wct4xxp driver included in original Zaptel without any patch.
Specification
1) configuration & interface
--4 X E1/T1 interfaces ( E1/T1 selectable)
--PCI 5.0V interface
--4 PRI port total 120 channels
--Hardware DTMF detection
--Conference Bridge
--PCM bus connectors (PCM30, PCM64, PCM128)
--4 dual-color LEDs (layer 1 state indicators)
--Active channel switching (across multiple cards over the external PCM bus)
--PRI ISDN protocol stack
--Suitable for 5.0 volts 32 bit PCI 2.2 slots
2)Data Modes
--Cisco HDLC
--HDLC
--PPP
--Multilink PPP
--Frame Relay
3)Voice Modes
--PRI CPE & PRI NET
--NI1
--NI2
--EuroISDN
--4ESS (AT&T)
--5ESS (Lucent)
--DMS100
4)E&M
-- Wink
--Feature Group B
-- Feature Group D
5)FXO & FXS
--Ground Start
--Loop Start
--Loop Start with Disconnect Detect
--Package:
Asterisk VoIP PCI card x 1 pc